Pro Micro 5V 16M Mini Leonardo Microcontroller Development Board for Compatible with Arduino

Product description

The Arduino Pro Mini is a microcontroller board based on the ATmega328P.

It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. A six pin header can be connected to an FTDI cable or Sparkfun breakout board to provide USB power and communication to the board. The Arduino Pro Mini is intended for semi-permanent installation in objects or exhibitions. The board comes without pre-mounted headers, allowing the use of various types of connectors or direct soldering of wires. The pin layout is compatible with the Arduino Mini.

There are two version of the Pro Mini. One runs at 3.3V and 8 MHz, the other at 5V and 16 MHz.

The Arduino Pro Mini was designed and is manufactured by SparkFun Electronics.

Features:

• ATmega32U4 running at 5V/16MHz
• Supported by Aduino IDE v1.0.1
• On-Board Micro-USB connector for programming
• 4 x 10-bit ADC pins, 12 x Digital I/Os
• Rx and Tx Hardware Serial Connections

Note: 1.When you open the Aduino IDE software, pls go to the tool and choose the board “Aduino Leonardo”
2.The acceptable voltage range is 5 to 9 V.