L298N 2A Based Motor Driver Controller Board Module – For DC And Stepper Motors

This L298N Based Motor Driver Module uses the popular L298N motor driver IC and has an onboard 5V regulator which it can supply to an external circuit. It has the capability to control up to 4 DC motors, or 2 DC motors with directional and speed control. L298N Motor Driver Board is a high voltage, high current dual full-bridge driver designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC and stepper motors. It has 2 enable inputs provided to enable or disable the device independently of the input signals. It also has an additional supply input to ensure that the logic works at the lower level.

About this item:-

• L298N Motor Driver Controller Module is a high power motor driver for driving DC and Stepper motors. It can control up to 4 DC motors, or 2 DC motors with directional and speed control. This motor driver is perfect for robotics and mechatronics projects.
• Current Sense for each motor | Heatsink for better performance | Power-On LED indicator | Directional control | Speed control | High power motor
• This motor driver is perfect for robotics and mechatronics projects. It can also be used for controlling motors from microcontrollers, switches, relays, etc. It is capable of driving DC and Stepper motors for micro mouse, line following robots, robot arms, etc.
• Input Voltage : 3.2V to 40Vdc Driver : L298N Dual H-Bridge DC Motor Driver Operating voltage : DC 5V – 35V Peak Current : 2 Amps Speed Control : PWM Control Signal input Low voltage range : 0.3V ≤ Vin ≤ 1.5V Control Signal input High voltage range : 2.3 ≤ Vin ≤ Vss Enable signal input low voltage range : 0.3V ≤ Vin ≤ 1.5V (enable signal inactive) Enable signal input high voltage range : 2.3V ≤ Vin ≤ Vss (enable signal active) Maximum power consumption : 20W (when the temperature T = 75℃)